As a rule, PVC film is used as a material for stretch ceilings. This is a synthetic material on the surface of which mold does not grow. However, if moisture is constantly retained in the space between the film and the ceiling, then the fungus will appear there anyway. This happens if the work on the installation of stretch ceilings was carried out poorly, and the conditions for waterproofing were not met. Naturally, under such conditions, it won’t be possible to get rid of the fungus on the ceiling quickly because the process will be more complicated than working with a conventional ceiling. However, such services as mold remediation services St Louis can help you recover your ceiling.
If you saw mold on the stretch ceiling, you should know that there is even more of it between the ceiling and the film. You need to accept the fact that you will need to completely dismantle the PVC film. Of course, most likely you won’t be able to do without specialists from mold remediation services St Louis to deal with the mold and specialists in the installation of stretch ceilings.
To remove the stretch ceiling structure, first of all, it’s necessary to remove the film. Only then can the ceiling be treated with an antiseptic composition. Not only must the spots with mold be treated with the special cleaning products, but the entire surface of the ceiling too. If there are cracks on the ceiling, then they should be treated very carefully with an antiseptic.
After the treatment with the antiseptic, the cracks are sealed with a special product that will prevent the fungus from developing in them. In order to prevent the spread of mold on the ceiling, mold remediation services St Louis treat it with antifungal primer. The last step is to install the stretch ceiling back. Naturally, in this case, one cannot do without special equipment. In the end, the film should also be coated with a primer.
What should you do to prevent mold from forming on the ceiling?
There are many ways to remove mold, but it is easier to do everything so that it does not even appear.
Experts from mold remediation services recommend following these guidelines to prevent mold in your home:
- ventilate the room in a timely manner;
- arrange a reliable ventilation system;
- Do not dry clothes inside the house – do it outside, even in winter;
- prevent even minor leaks in water pipes in the house;
- timely repair of ventilation ducts in the bathroom;
- if you decide to make repairs in the house, make sure that all the materials necessary for these purposes are moisture resistant.
Ceiling compositions
In order to remove mold from the ceiling, mold remediation services St Louis have the following supplies at their disposal:
- rubber gloves;
- spray gun;
- ladder;
- protective coating for floors and furniture;
- products for elimination of fungus.
It’s necessary to remove all the furniture from the room for a while. As a rule, mold remediation services remove up to 10-15 mm of finishing material from the ceiling because the spores of the fungus can penetrate deep into the walls, and sometimes it is quite difficult to get rid of them. After the surface of the ceiling dries, it’s possible to process it with antifungal agents.
Although getting rid of mold is not easy, however with the help of professional services, it can be done quickly and efficiently.
Discussion about this post